North Carolina Administrative Code
Title 15A - Environmental Quality
Chapter 02 - ENVIRONMENTAL MANAGEMENT
Subchapter D - AIR POLLUTION CONTROL REQUIREMENTS
Section .2600 - SOURCE TESTING
Section 02D .2612 - NITROGEN OXIDE TESTING METHODS
Universal Citation: 15A NC Admin Code 02D .2612
Current through Register Vol. 39, No. 6, September 16, 2024
(a) Combustion sources not required to use continuous emissions monitoring to demonstrate compliance with nitrogen oxide emission standards shall demonstrate compliance with nitrogen oxide emission standards using Method 7 or Method 7E of Appendix A to 40 CFR Part 60.
(b) Method 20 of Appendix A to 40 CFR Part 60 shall be used to demonstrate compliance with nitrogen oxide emissions standards for stationary gas turbines.
Authority
G.S.
143-215.3(a)(1);
143-215.65;
143-215.66;
143-215.107(a)(5);
Eff. June 1, 2008;
Readopted Eff. November 1,
2019.
Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
