North Carolina Administrative Code
Title 15A - Environmental Quality
Chapter 02 - ENVIRONMENTAL MANAGEMENT
Subchapter D - AIR POLLUTION CONTROL REQUIREMENTS
Section .2600 - SOURCE TESTING
Section 02D .2608 - NUMBER OF RUNS AND COMPLIANCE DETERMINATION

Universal Citation: 15A NC Admin Code 02D .2608
Current through Register Vol. 39, No. 6, September 16, 2024

Each test, excluding fuel sample tests, shall consist of three consecutive runs of the applicable test method at the same operating condition. If other operating conditions or scenarios are to be tested, then three consecutive runs shall be performed for each of these operating conditions or scenarios. For determining compliance with an applicable emission standard, the average of the results of all repetitions shall apply. On a case-by-case basis, compliance may be determined using the arithmetic average of two run results if the Director determines that an unavoidable and unforeseeable event happened beyond the owner's, operator's, or tester's control and that a third run could not be completed.

Authority G.S. 143-215.3(a)(1); 143-215.65; 143-215.66; 143-215.107(a)(5);
Eff. June 1, 2008;
Readopted Eff. November 1, 2019;
Amended Eff. October 1, 2022.

Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.