North Carolina Administrative Code
Title 15A - Environmental Quality
Chapter 02 - ENVIRONMENTAL MANAGEMENT
Subchapter D - AIR POLLUTION CONTROL REQUIREMENTS
Section .0600 - MONITORING: RECORDKEEPING: REPORTING
Section 02D .0602 - DEFINITIONS

(1) "Applicable requirement" means any rule, standard, or requirement established in Subchapters 02D or 02Q of this Chapter or Article 21 of the North Carolina General Statutes.

(2) "Calendar quarter" means:

(3) "Capacity factor" means the ratio of the average load on a machine or equipment for a defined time period considered to the capacity rating of the machine or equipment.

(4) "Distillate oils" means fuel oil, including recycled oil, that complies with the specifications for fuel oil numbers 1 or 2, as defined by the American Society for Testing and Materials in ASTM D-396, "Standard Specification for Fuel Oils."

(5) "Emission standard" means a State rule or federal regulation setting forth:

(6) "Excess emissions" means emissions of an air pollutant in excess of an emission standard.

(7) "Fossil fuel-fired steam generator" means a furnace or boiler used in the process of burning fossil fuel for the primary purpose of producing steam by heat transfer.

(8) "Good operation and maintenance" means minimizing air pollutant emissions from air pollution control equipment, reducing equipment malfunctions, and ensuring continued compliance with State rules, federal regulations, and permit requirements.

(9) "Nitric acid plant" means any facility producing nitric acid 30 to 70 percent in strength by either the pressure or atmospheric pressure process.

(10) "Permit condition" means:

(11) "Petroleum refinery" means any facility engaged in producing gasoline, kerosene, distillate oils, residual oils, lubricants, or other products through the distillation of petroleum or through the redistillation, cracking, or reforming of unfinished petroleum derivatives.

(12) "Residual oils" means crude oil, fuel oil that does not comply with the specifications according to the definition of distillate oil, or all fuel oil numbers 4, 5, and 6, as defined by the American Society for Testing and Materials in ASTM D-396, "Standard Specification for Fuel Oils."

(13) "Sulfuric acid plant" means any facility producing sulfuric acid by the contact process by burning elemental sulfur, alkylation acid, hydrogen sulfide, or acid sludge, but does not include facilities where conversion to sulfuric acid is used primarily as a means of preventing emissions to the atmosphere of sulfur dioxide or other sulfur compounds.