North Carolina Administrative Code
Title 13 - LABOR
Chapter 06 - MINE AND QUARRY DIVISION
Section .0500 - SURFACE MINE: PIT AND QUARRY STANDARDS
Section 06 .0513 - CRUSHING EQUIPMENT

Universal Citation: 13 NC Admin Code 06 .0513

Current through Register Vol. 39, No. 6, September 16, 2024

(a) Feeders. Miners shall not be permitted to enter an operating feeder.

(b) Guard Rails or Chains. Guard rails, chains or other protective devices shall be installed and maintained around jaw-type crusher openings. When necessary for miners to work over an operating jaw-type crusher to clear jams, safety belts and life lines shall be used.

(c) Place of Safety at Crusher. Miners working at the crusher feed opening shall not be permitted to stand directly in back of or at the side of a vehicle while its contents are being dumped therein, unless provided with adequate protection from flying material.

(d) Work Beneath Feeders and Hoppers. Miners shall not be permitted to work beneath a feeder or hopper where a hazard from falling material exists.

Authority G.S. 74-24.4(a);
Eff. February 1, 1976;
Readopted Eff. September 30, 1977;
Pursuant to G.S. 150B-21.3A, rule is necessary without substantive public interest Eff. July 22, 2018.

Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.