North Carolina Administrative Code
Title 10A - HEALTH AND HUMAN SERVICES
Chapter 15 - RADIATION PROTECTION
Section .1400 - TANNING FACILITIES
Section 15 .1422 - REPORTS AND INSTALLATION

Universal Citation: 10A NC Admin Code 15 .1422

Current through Register Vol. 39, No. 6, September 16, 2024

(a) Persons registered pursuant to Rule.1421 of this Section, who sell, lease, transfer, lend, dispose of, assemble or install tanning equipment in this state shall, within 30 days after each calendar quarter, notify the agency at the address in Rule.1419 of this Section, of:

(1) whether any tanning equipment was installed, transferred, or disposed of during the calendar quarter;

(2) the name and address of persons who receive tanning equipment during the calendar quarter;

(3) the manufacturer, model and serial number of tanning equipment transferred or otherwise disposed of; and

(4) the date of transfer of any tanning equipment.

(b) No person shall make, sell, lease, transfer, lend, repair, assemble, or install tanning equipment or the supplies used in connection with such equipment unless such supplies and equipment when properly placed in operation and used shall meet the requirements of the rules in this Section and the regulations of 21 CFR 1040.20.

Authority G.S. 104E-7(a)(7);
Eff. May 1, 1993;
Amended Eff. August 1, 2002;
Transferred and Recodified from 15A NCAC 11.1422 Eff. February 1, 2015;
Pursuant to G.S. 150B-21.3A, rule is necessary without substantive public interest Eff. June 22, 2019.

Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.