North Carolina Administrative Code
Title 10A - HEALTH AND HUMAN SERVICES
Chapter 14 - Director, Division of Health Service Regulation
Subchapter J - JAILS, LOCAL CONFINEMENT FACILITIES
Section .1600 - CONSTRUCTION STANDARDS FOR EXISTING STATE FUNDED SATELLITE JAIL/WORK RELEASE UNITS
Section 14J .1606 - MECHANICAL SYSTEMS

Universal Citation: 10A NC Admin Code 14J .1606

Current through Register Vol. 39, No. 6, September 16, 2024

Mechanical systems shall:

(1) Provide heating, ventilation, and air conditioning to meet the requirements of the N.C. Building Code;

(2) Have master controls for electrical, plumbing, heating, and air conditioning, that are inaccessible to inmates;

(3) Have master cutoff controls for electrical and water supplies to each confinement area (either single cells or dormitory type areas);

(4) Have capability of maintaining temperatures in the confinement areas within 68 degrees Fahrenheit minimum in the heating season and a maximum of 85 degrees Fahrenheit during the non-heating season.

Authority G.S. 153A-230.4;
Eff. June 1, 1990;
Pursuant to G.S. 150B-21.3A, rule is necessary without substantive public interest Eff. January 5, 2016.

Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.