North Carolina Administrative Code
Title 10A - HEALTH AND HUMAN SERVICES
Chapter 14 - Director, Division of Health Service Regulation
Subchapter J - JAILS, LOCAL CONFINEMENT FACILITIES
Section .1500 - CONSTRUCTION STANDARDS FOR EXISTING FACILITIES
Section 14J .1515 - SWINGING DOORS

Universal Citation: 10A NC Admin Code 14J .1515

Current through Register Vol. 39, No. 6, September 16, 2024

(a) Plate doors installed in plate walls shall be made of steel that is at least the same quality and thickness as specified for the wall in which the door opening is installed.

(b) Plate doors installed in concrete or masonry walls shall be made of material not lighter than 3/16 inch thick open hearth steel plate framed and stiffened with angles, bars, or other shapes and securely hung to door frames made of structural or bent plate channel at least 3/16 inch thick.

(c) The depth of plate door frame shall equal the thickness of the wall.

(d) Grating doors installed either in grating, plate walls, or concrete or masonry walls shall be constructed of tool-resisting steel or open-hearth steel as specified by the plans.

Authority G.S. 153A-220; 153A-221;
Eff. June 1, 1990;
Pursuant to G.S. 150B-21.3A, rule is necessary without substantive public interest Eff. January 5, 2016.

Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.