North Carolina Administrative Code
Title 10A - HEALTH AND HUMAN SERVICES
Chapter 14 - Director, Division of Health Service Regulation
Subchapter J - JAILS, LOCAL CONFINEMENT FACILITIES
Section .1500 - CONSTRUCTION STANDARDS FOR EXISTING FACILITIES
Section 14J .1514 - SLIDING DOORS

Universal Citation: 10A NC Admin Code 14J .1514

Current through Register Vol. 39, No. 6, September 16, 2024

(a) Sliding doors shall be made of the same weight and quality of grating or plate as the confinement area fronts or wall in which they are installed.

(b) Sliding doors shall be approximately two feet x six feet, three inches, and shall be hung from the top by a plate door carriage.

(c) The door carriage shall have two hardened steel spindles on which will be mounted two needle-bearing or two S.K.F. or approved equal ball-bearing solid steel machined wheels.

(d) The door carriage shall be enclosed in a covered box of the prescribed type.

Authority G.S. 153A-220; 153A-221;
Eff. June 1, 1990;
Pursuant to G.S. 150B-21.3A, rule is necessary without substantive public interest Eff. January 5, 2016.

Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.