North Carolina Administrative Code
Title 04 - COMMERCE
Chapter 11 - UTILITIES COMMISSION
Chapter 10
Section 11 R10-11 - SERVICE CONNECTIONS

Current through Register Vol. 39, No. 6, September 16, 2024

(a) Each sewer utility shall adopt a standard method for installing a sewer service connection, which may be included in the "connection charge." Such method shall be set out with a written description and drawings, together with a schedule of connection charges, to the extent necessary for a clear understanding of the requirements and shall be submitted to the Commission for its approval.

(b) Temporary service shall be installed by mutual agreement.

(c) The customer shall furnish and lay the necessary pipe to make the connection from the property line nearest the utility's sewer line to the point of use and shall keep the service line in good repair. The customer shall not make any change in or rebuild such service line without giving written notice to the utility. All of the foregoing shall be designated as "customer's service line."

(d) In any case where a reasonable doubt exists as to the proper location and size for "customer's service line," the utility shall be consulted and its approval of the location and size of line be secured in writing.

NCUC Docket No. S-100, Sub 1, 8/23/67.

Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.