North Carolina Administrative Code
Title 02 - AGRICULTURE AND CONSUMER SERVICES
Chapter 52 - VETERINARY
Subchapter D - MEAT AND POULTRY INSPECTION
Section .0100 - STANDARDS: OFFICIAL MARK
Section 52D .0102 - OFFICIAL MARK OF INSPECTION
Current through Register Vol. 39, No. 6, September 16, 2024
Part 312 of the Federal Meat Inspection Regulation shall refer to the following official North Carolina mark of inspection:
(1) The mark shall be an isosceles trapezoid with base and top lines parallel, and the top line centered over the base. The distance between the base and top lines shall be equal to the length of the top line. The proportion for these lengths shall be as follows:
Base Line Top Line Distance Between
Base and Top
8 5 5
(2) The text of the mark within the border of the trapezoid shall be as follows:
(3) A height of approximately one-ninth of the vertical distance between the base and top lines shall be the lettering size for "INSP'D," "AND," "PASSED," "BY," "N.C.D.A." as they appear in the official North Carolina mark of inspection.
(4) A height of not less than one-seventh and not greater than one-sixth of the vertical distance between the base and top lines shall be the lettering size for the plant designator number "P----(No.)" as it appears in the official North Carolina mark of inspection.
Authority
G.S.
106-549.21;
106-549.22;
106-549.28;
Eff.
April 1, 1984;
Pursuant to
G.S.
150B-21.3A, rule is necessary without
substantive public interest Eff. March 26,
2017.