New York Codes, Rules and Regulations
Title 9 - EXECUTIVE DEPARTMENT
Subtitle G - Office of General Services
Chapter V - Design And Construction Group
Part 312 - Restrictions on the Luminous Power of Lighting Fixtures
Section 312.4 - Industry Standards

Universal Citation: 9 NY Comp Codes Rules and Regs ยง 312.4

Current through Register Vol. 46, No. 12, March 20, 2024

When installing new or replacement permanent outdoor lighting fixtures, State agencies shall comply with the following industry standards contained within the following publications:

(a) Roadway lighting: Any of the industry standards listed in para- graphs (1), (2), or (3) of this subdivision may be used provided the standard contains a guideline for the relevant type of roadway lighting application.

(1) American Association of State Highway and Transportation Officials (AASHTO) - Roadway Lighting Design Guide 6th ed. (October 2005)

(2) Approved American National Standards Institute (ANSI)/ Illuminating Engineering Society (IES) - RP-8-14 Roadway Lighting

(3) IES - DG-19-08 Design Guide for Roundabout Lighting

(b) Parking-lot lighting: IES - RP-20-14 Lighting for Parking Facilities

(c) Building facade lighting: IES - The Lighting Handbook, 10th Edition

(d) Building-mounted fixtures not specifically intended for roadway lighting, parking-lot lighting or building facade lighting: The Lighting Handbook, 10th Edition

Whenever a State agency uses any of the IES standards identified in this section, such agency shall also refer to The Lighting Handbook, 10th Edition in order to properly interpret such IES standards.

Disclaimer: These regulations may not be the most recent version. New York may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.