New York Codes, Rules and Regulations
Title 9 - EXECUTIVE DEPARTMENT
Subtitle BB - State Energy Office
Chapter V - Conservation Programs
Part 7920 - Not-for-profit Energy Incentive Program
Section 7920.8 - Focused energy analyses
Universal Citation: 9 NY Comp Codes Rules and Regs ยง 7920.8
Current through Register Vol. 46, No. 39, September 25, 2024
(a) Acceptable analyses. A focused energy analysis must be performed by a utility company representative, registered architect, or a professional engineer, in accordance with generally accepted engineering standards.
(b) Contents. A focused energy analysis must contain the following information:
(1) a
general description of the facility, its operating hours, and information on
its representative annual energy costs by fuel type;
(2) a description of the equipment or
building system(s) and the proposed energy conservation measure relating to
such equipment or building system(s);
(3) energy savings (in either Btu or kWh) and
energy cost savings specific to the proposed measure. All calculations,
including input data and pertinent assumptions, must be clearly shown. Energy
cost savings shall not include cost savings from taxes and those savings due to
switching to lower cost fuels; and
(4) a calculation of simple
payback.
(c) Where a measure recommended in a focused energy analysis also appears on the list of eligible measures prepared by the commissioner pursuant to section 7920.5(b) of this Part, the energy efficiency of such measure shall be no less than the minimum efficiency, if any, specified for that measure on such list.
Disclaimer: These regulations may not be the most recent version. New York may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
