New York Codes, Rules and Regulations
Title 6 - DEPARTMENT OF ENVIRONMENTAL CONSERVATION
Chapter X - DIVISION OF WATER RESOURCES
Subchapter A - GENERAL
Article 3 - STATE POLLUTANT DISCHARGE ELIMINATION SYSTEM
Part 750 - STATE POLLUTANT DISCHARGE ELIMINATION SYSTEM (SPDES) PERMITS
Subpart 750-1 - OBTAINING A SPDES PERMIT AND POSS REGISTRATION
Section 750-1.25 - References

(a) USEPA guidance publications.

* USEPA Guidance on Whole Effluent Toxicity Testing - Methods for Measuring the Acute Toxicity of Effluents and Receiving Waters to Freshwater and Marine Organisms, Fifth Edition, EPA-821-R-02-012 (2002)

* Short-term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Freshwater Organisms, Fourth Edition, EPA-821-R-02-013 (2002)

* Short-term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms, Third Edition, EPA-821-R-02-014 (2002)

(b) As it appears in Title 33 Code of Federal Regulation (C.F.R.) on the date shown in parentheses:

* Part 153 - Control of Pollution by Oil and Hazardous Substances, Discharge Removal - (July 7, 2014)

(c) As it appears in Title 40 Code of Federal Regulation (C.F.R.) on the date shown in parentheses:

* Part 35 - State and Local Assistance - (August 23, 2019)

* Part 122 - EPA Administered Programs: The National Pollutant Discharge Elimination System - (November 2, 2020)

* Part 123.44 - EPA Review of and Objections to State Permits - (May 15, 2000)

* Part 124.10 - Public Notice of Permit Actions and Public Comment Period - (February 12, 2019)

* Part 125 - Criteria and Standards for the National Pollutant Discharge Elimination System - (February 12, 2019)

* Part 129 -Toxic Pollutant Effluent Standards - (February 2, 1977)

* Part 130 - Water Quality Planning and Management - (September 26, 2016)

* Part 132 - Water Quality Guidance for the Great Lakes System -(September 16, 2011)

* Part 133 - Secondary Treatment Regulation - (January 27, 1989)

* Part 136 - Guidelines Establishing Test Procedures for the Analysis of Pollutants - (May 19, 2021)

* Part 144 - Underground Injection Control Program - (December 10, 2010)

* Part 146 - Underground Injection Control Program: Criteria and Standards - (December 10, 2010)

* Part 300 - National Oil and Hazardous Substances Pollution Contingency Plan - (April 21, 2020)

* Part 401 - General Provisions - (April 21, 2020)

* Part 403 - General Pretreatment Regulations for Existing and New Sources of Pollution - (November 2, 2020)

* Part 405 - Dairy Products Processing Point Source Category -(June 29, 1995)

* Part 406 - Grain Mills Point Source Category - (June 29, 1995)

* Part 407 - Canned and Preserved Fruits and Vegetables Processing Point Source Category - (June 29, 1995)

* Part 408 - Canned and Preserved Seafood Processing Point Source Category - (June 29, 1995)

* Part 409 - Sugar Processing Point Source Category - (June 29, 1995)

* Part 410 - Textile Mills Point Source Category - (September 1, 1983)

* Part 411 - Cement Manufacturing Point Source Category - (June 29, 1995)

* Part 412 - Concentrated Animal Feeding Operations (CAFO) Point Source Category - (November 20, 2008)

* Part 413 - Electroplating Point Source Category - (November 7, 1986)

* Part 414 - Organic Chemicals, Plastics, and Synthetic Fibers -(July 9, 1993)

* Part 415 - Inorganic Chemicals Manufacturing Point Source Category - (September 25, 1984)

* Part 417 - Soap and Detergent Manufacturing Point Source Category - (June 29, 1995)

* Part 418 - Fertilizer Manufacturing Point Source Category - (June 29, 1995)

* Part 419 - Petroleum Refining Point Source Category - (August 12, 1985)

* Part 420 - Iron and Steel Manufacturing Point Source Category - (December 13, 2005)

* Part 421 - Nonferrous Metals Manufacturing Point Source Category - (September 7, 1990)

* Part 422 - Phosphate Manufacturing Point Source Category - (July 9, 1986)

* Part 423 - Steam Electric Power Generating Point Source Category - (October 13, 2020)

* Part 424 - Ferroalloy Manufacturing Point Source Category - (June 29, 1995)

* Part 425 - Leather Tanning and Finishing Point Source Category - (July 8, 1996)

* Part 426 - Glass Manufacturing Point Source Category - (June 29, 1995)

* Part 427 - Asbestos Manufacturing Point S ource Category - (June 29, 1995)

* Part 428 - Rubber Manufacturing Point Source Category - (June 29, 1995)

* Part 429 - Timber Products Processing Point Source Category - (July 30, 2004)

* Part 430 - The Pulp, Paper, and Paperboard Point Source Category - (May 18, 2012)

* Part 432 - Meat and Poultry Products Point Source Category - (September 8, 2004)

* Part 433 - Metal Finishing Point Source Category - (November 7, 1986)

* Part 434 - Coal Mining Point Source Category BPT, BAT, BCT Limitations and New Source Performance Standards - (January 23, 2002)

* Part 435 - Oil and Gas Extraction Point Source Category - (December 7, 2016)

* Part 436 - Mineral Mining and Processing Point Source Category -(July 11, 1995)

* Part 437 - The Centralized Waste Treatment Point Source Category - (December 22, 2003)

* Part 438 - Metal Products and Machinery Point Source Category - (May 13, 2003)

* Part 439 - Pharmaceutical Manufacturing Point Source Category - (March 13, 2003)

* Part 440 - Ore Mining and Dressing Point Source Category - (May 24, 1988)

* Part 441 - Dental Office Point Source Category - (July 5, 2017)

* Part 442 -Transportation Equipment Cleaning Point Source Category - (February 1, 2005)

* Part 443 - Effluent Limitations Guidelines for Existing Sources and Standards of Performance and Pretreatment Standards for New Sources for the Paving and Roofing Materials (Tars and Asphalt) Point Source Category - (June 29, 1995)

* Part 444 - Waste Combustors Point Source Category - (April 9, 2004)

* Part 445 - Landfills Point Source Category - (March 16, 2000)

* Part 446 - Paint Formulating Point Source Category - (June 29, 1995)

* Part 447 - Ink Formulating Point Source Category - (June 29, 1995)

* Part 449 - Airport Deicing Point Source Category - (May 16, 2012)

* Part 450 - Construction and Development Point Source Category - (May 4, 2015)

* Part 451 - Concentrated Aquatic Animal Production Point Source Category - (August 23, 2004)

* Part 454 - Gum and Wood Chemicals Manufacturing Point Source Category - (June 29, 1995)

* Part 455 - Pesticide Chemicals - (March 12, 2007)

* Part 457 - Explosives Manufacturing Point Source Category - (June 29, 1995)

* Part 458 - Carbon Black Manufacturing Point Source Category - (June 29, 1995)

* Part 459 - Photographic Point Source Category - (July 14, 1976)

* Part 460 - Hospital Point Source Category - (June 29, 1995)

* Part 461 - Battery Manufacturing Point Source Category - (August 28, 1986)

* Part 463 - Plastics Molding and Forming Point Source Category - (April 30, 1985)

* Part 464 - Metal Molding and Casting Point Source Category - (June 16, 1986)

* Part 465 - Coil Coating Point Source Category - (March 12, 2007)

* Part 466 - Porcelain Enameling Point Source Category - (September 6, 1985)

* Part 467 - Aluminum Forming Point Source Category - (December 27, 1988)

* Part 468 - Copper Forming Point Source Category - (June 20, 1986)

* Part 469 - Electrical and Electronic Components Point Source Category - (January 31, 1985)

* Part 471 - Nonferrous Metals Forming and Metal Powders Point Source Category - (April 4, 1989)

(d) Act means the Clean Water Act formerly referred to as the Federal Water Pollution Control Act, 33 U.S.C. § 1251 et seq.- (January 14, 2019) References:

* Section 1284 - Limitations and conditions- Additional determinations; issuance of guidelines; approval by Administrator; system of charges

* Section 1288(b) -Areawide waste treatment management-Planning process

* Section 1311 -Effluent limitations

* Section 1312 -Water quality related effluent limitations

* Section 1313 -Water quality standards and implementation plans

* Section 1314 -Information and guidelines

* Section 1316 -National standards of performance

* Section 1317 -Toxic and pretreatment effluent standards

* Section 1318 -Records and Reports; Inspections

* Section 1321 -Oil and hazardous substance liability

* Section 1326 -Thermal discharges

* Section 1342 -National pollutant discharge elimination system

* Section 1343 -Ocean discharge criteria

* Section 1370 -State authority

(e) All publications referenced in this Part are available electronically at https://dec.ny.gov/fs/projects/spdes/

(f) All material referenced in this Part is available for copying and inspection at the New York State Department of Environmental Conservation, Division of Water at its Central Office location in Albany County.

(g) Ten States Standards means Recommended Standards for Wastewater Facilities, Policies for the Design, Review and Approval of Plans and Specifications For Wastewater Collection and Treatment Facilities, 2014 Edition.

(h) Intermediate Design Standards means New York State Design Standards for Intermediate Sized Wastewater Treatment Systems, 2014