New York Codes, Rules and Regulations
Title 19 - DEPARTMENT OF STATE
Chapter XXXII - Division of Code Enforcement and Administration
Part 1209 - Regulations And Fees For Factory Manufactured Homes
Section 1209.6 - Insignia of approval fees

Current through Register Vol. 46, No. 12, March 20, 2024

The following fees for insignia of approval shall be paid to the division by the manufacturer. Insignia of approval will be issued in lots of not less than five:

(a) one hundred and twenty-five dollars for each insignia of approval for each one- or two- family dwelling;

(b) thirty-seven dollars and fifty cents for any one unit, model, component or combination thereof;

(c) one insignia of approval shall be required for:

(1) each one- or two-family dwelling;

(2) each dwelling unit in a multiple dwelling (B1, B3 and B4 occupancies);

(3) each sleeping room in a multiple dwelling (B2 occupancy), with or without bath; and

(4) each component that does not fit into a description above;

(d) withdrawal of application for plan approval prior to completion of processing will result in:

(1) forfeiture of plan filing fee; and

(2) forfeiture of that portion of the plan approval fee based on actual cost, as determined by the division.

Disclaimer: These regulations may not be the most recent version. New York may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.