New York Codes, Rules and Regulations
Title 17 - DEPARTMENT OF TRANSPORTATION
Chapter VI - Transportation Regulations
Subchapter F - Railroad And Street Railroad Corporations
Article 2 - Safety
Part 922 - Locomotive Boilers And Steam Reservoirs
Section 922.5 - Shearing strength of rivets
Universal Citation: 17 NY Comp Codes Rules and Regs ยง 922.5
Current through Register Vol. 46, No. 39, September 25, 2024
(a) The maximum shearing strength of rivets per square inch of cross-sectional area shall be taken as follows:
|
Pounds |
|
|
Iron rivets in single shear ....... |
38,000 |
|
Iron rivets in double shear ....... |
76,000 |
|
Steel rivets in single shear ....... |
44,000 |
|
Steel rivets in double shear ....... |
88,000 |
(b) A higher shearing strength may be used for rivets when it can be shown by test that the rivet material used is of such quality as to justify the use of a higher shearing strength.
Disclaimer: These regulations may not be the most recent version. New York may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
