New York Codes, Rules and Regulations
Title 17 - DEPARTMENT OF TRANSPORTATION
Chapter V - New York State Supplement To The National Manual On Uniform Traffic Control Devices For Streets And Highways-2009 Edition
Part 4 - Highway Traffic Signals
Chapter 4M - Lane-use Control Signals
Section 4M.03 - Design of Lane-Use Control Signals

Current through Register Vol. 46, No. 12, March 20, 2024

DELETE Paragraphs 01, 03, 05, and 13.

INSERT the following paragraphs:

Standard:

00A All lane-use control signal indications shall be in units with rectangular signal faces and shall have opaque backgrounds. Nominal minimum height and width of each DOWNWARD GREEN ARROW, YELLOW X, and RED X signal face shall be 18 inches for typical applications.

Standard:

02A Each reversible lane that also operates as a two-way or one-way left-turn lane during certain periods shall have signal faces that also include the applicable flashing YELLOW X symbol.

Standard:

04A If in separate signal sections, the relative positions from left to right of the signal indications shall be RED X, YELLOW X, and DOWNWARD GREEN ARROW.

Option:

12A In areas with minimal visual clutter and with speeds of less than 40 MPH, lane-use control signal faces with nominal height and width of 12 inches may be used for the DOWNWARD GREEN ARROW, YELLOW X, and RED X signal faces.

Disclaimer: These regulations may not be the most recent version. New York may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.