New York Codes, Rules and Regulations
Title 17 - DEPARTMENT OF TRANSPORTATION
Chapter V - New York State Supplement To The National Manual On Uniform Traffic Control Devices For Streets And Highways-2009 Edition
Part 3 - Markings
Chapter 3B - Pavement And Curb Markings
Section 3B.19 - Parking Space Markings

INSERT the following paragraphs:

Standard:

03A Transverse lines shall be used where parking spaces are marked on a roadway which does not have standard centerline or lane markings.

Option:

03B On roadways which have standard centerline or lane markings, the parking lane may be indicated by a dotted line consisting of uniform line segments 4 feet in length separated by uniform gaps approximately 20 feet long.

Guidance:

03C Where peak-hour parking prohibitions permit the use of the parking lane as a travel lane, the parking lane should be at least 10 feet wide.

Option:

03D An edge line may be used to separate the travel lanes from the parking lanes.

Standard:

03E Angle parking sections, where marked, shall be indicated by parallel lines defining the individual parking stalls. Such lines shall extend into the roadway for a distance of between 17 to 21 feet.

Option:

03F The ends may be connected by a continuous longitudinal line.

Standard:

03G Stall width in angled parking sections shall allow sufficient space between parked vehicles to permit opening of vehicle doors.