New York Codes, Rules and Regulations
Title 17 - DEPARTMENT OF TRANSPORTATION
Chapter V - New York State Supplement To The National Manual On Uniform Traffic Control Devices For Streets And Highways-2009 Edition
Part 2 - Signs
Chapter 2B - Regulatory Signs, Barricades, And Gates
Section 2B.101 - End Speed Zone Sign (NYR2-11)

Universal Citation: 17 NY Comp Codes Rules and Regs § 2B.101

Current through Register 47, No. 25, June 25, 2025

Option:

01 The End Speed Zone (NYR2-11) sign (see Sign Drawing SD-R1) may be used for posting the end of a linear or area speed limit which is followed by the statewide limit. It is a substitute for the NYR2-2 sign (see Section 2B.13) at that location.

Standard:

02 The NYR2-11 sign shall be used only where the NYR2-2 sign would be unsuitable because of conditions immediately beyond the sign location. Examples of such conditions are:

A. A curve with advisory speed less than the statewide limit.

B. A school building adjacent to the highway.

C. Highway and/or roadside characteristics which are not conducive to an immediate increase in travel speed.

03 Where the NYR2-11 sign is used, a NYR2-2 sign shall be placed beyond it at the first suitable location, unless another speed restriction begins within one-quarter mile of that location.

Disclaimer: These regulations may not be the most recent version. New York may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.