New York Codes, Rules and Regulations
Title 16 - DEPARTMENT OF PUBLIC SERVICE
Chapter V - WATERWORKS CORPORATIONS
Subchapter A - SERVICE
Part 502 - Construction And Maintenance Of Service Pipes
Section 502.1 - Standards

Current through Register Vol. 46, No. 12, March 20, 2024

Every water-works corporation shall on or before November 15, 1935, submit for the approval of this commission proposed amendments to its tariff schedules setting forth rules and regulations covering the construction and maintenance of service pipes, such rules and regulations, among other things, to provide:

(a) The minimum depth at which all service pipes shall be laid. The depth so fixed to be sufficient to prevent freezing.

(b) The size and kind of pipe and apparatus to be installed, service pipes to be at least three- quarters inch in diameter except under unusual circumstances which shall be clearly defined.

(c) All connections of service pipes with the transmission mains where the covering over the main is less than five foot shall be made on the side of the main and the service pipe shall in no case have less covering than the main.

Disclaimer: These regulations may not be the most recent version. New York may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.