New York Codes, Rules and Regulations
Title 16 - DEPARTMENT OF PUBLIC SERVICE
Chapter II - ELECTRIC UTILITIES
Subchapter A - Service
Part 93 - Approval Of New Types Of Electricity Meters, Instrument Transformers And Auxiliary Devices
Section 93.6 - Form of application

Universal Citation: 16 NY Comp Codes Rules and Regs ยง 93.6

Current through Register Vol. 46, No. 12, March 20, 2024

The following shall be included in the application addressed to the commission:

(a) name and address of applicant;

(b) name and address of manufacturer;

(c) manufacturer's type of designation, together with a brief description of general and physical characteristics, including ratings, size, shape, adjustments and the type service to which the meter may be applied;

(d) statement of intent of sponsoring entity to use, if approved;

(e) a statement by the manufacturer or sponsoring entity certifying that the device under consideration has been tested to, and meets, all the requirements of this Part;

(f) a statement by the manufacturer, sponsoring entity or testing laboratory, certifying that:

(1) all tests have been conducted by personnel who have thorough practical and theoretical knowledge of the meters and adequate training in making precision measurements;

(2) the test equipment employed in these tests conforms to the applicable requirements specified in Standards and Standardizing Equipment, of the latest version of ANSI C12; and

(3) the accuracy of the test equipment has been established by comparison with standards whose accuracy is traceable to the National Institute of Standards and Technology.

Disclaimer: These regulations may not be the most recent version. New York may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.