New York Codes, Rules and Regulations
Title 15 - Department of Motor Vehicles
Chapter I - REGULATIONS OF THE COMMISSIONER
Subchapter D - Equipment
Part 53 - Brake Linings
Section 53.5 - Requirements for approval
Current through Register Vol. 46, No. 12, March 20, 2024
(a) No brake lining shall be approved which:
(b) No lining shall be approved which exhibits more than a 20 per cent or.050 variation of coefficient of friction, whichever is greater, below the average value of all five tests at each temperature point specified in paragraph (3) of subdivision (a) of this section.
(c) Approval of a brake lining as being in a specific coefficient of friction class does not constitute approval by the commissioner for installation of that lining in all vehicles or in any particular make or model of vehicle unless specifically stated. Brakes of different types require different levels of coefficient of friction which can be categorized among the levels adopted. The coefficient of friction classes do not substitute for the use of matched sets for particular installations.
(d) The requirements of this section may be waived at the discretion of the commissioner with respect to brake linings for special purpose vehicles or unusual brake designs subject to such conditions which will assure safety as the commissioner may prescribe in each specific case.