New York Codes, Rules and Regulations
Title 12 - DEPARTMENT OF LABOR
Chapter I - Industrial Board Of Appeals
Subchapter A - The Industrial Code
Part 14 - Construction, Installation, Inspection And Maintenance Of High Pressure Boilers; Construction Of Unfired Pressure Vessels
Subpart 14-3 - Repairs, Alterations And Miscellaneous Requirements
Rerating and Derating
Section 14-3.21 - Derating of a boiler

Current through Register Vol. 47, No. 12, March 26, 2025

(a) General requirements. Derating of a boiler by decreasing the maximum allowable working pressure may be done only after the requirements of subdivisions (b) through (d) of this section have been met. Derating may be initiated by the owner or the inspector.

(b) Nameplate requirements. When a boiler is derated, an additional nameplate shall be permanently attached. The nameplate for derating shall be as follows:

Image

(c) Nameplate attachment. Attachment of the nameplate shall be witnessed by the inspector.

(d) Reports. The inspector shall report the derating to the department.

Disclaimer: These regulations may not be the most recent version. New York may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.