New York Codes, Rules and Regulations
Title 12 - DEPARTMENT OF LABOR
Chapter I - Industrial Board Of Appeals
Subchapter A - The Industrial Code
Part 14 - Construction, Installation, Inspection And Maintenance Of High Pressure Boilers; Construction Of Unfired Pressure Vessels
Subpart 14-1 - Definitions
Section 14-1.4 - Allowable pressure

Universal Citation: 12 NY Comp Codes Rules and Regs § 14-1.4

Current through Register Vol. 47, No. 12, March 26, 2025

(a) No boiler shall be operated at a pressure in excess of the working pressure specified in the latest inspection certificate. Boilers of standard construction shall have an original factor of safety as determined by the ASME Code.

(b) Standard boilers of lap seam construction shall have a factor of safety determined in accordance with the ASME Code.

(c) For nonstandard boilers and reinstalled boilers see sections 14-10.1 through 14-10.4 of this Part.

(d) If it shall become necessary to increase the steam pressure allowed before the expiration of the certificate of inspection under which a boiler is being operated, a new certificate shall be required and the commissioner notified.

Disclaimer: These regulations may not be the most recent version. New York may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.