New York Codes, Rules and Regulations
Title 12 - DEPARTMENT OF LABOR
Chapter I - Industrial Board Of Appeals
Subchapter A - The Industrial Code
Part 14 - Construction, Installation, Inspection And Maintenance Of High Pressure Boilers; Construction Of Unfired Pressure Vessels
Subpart 14-1 - Definitions
Section 14-1.15 - Fusible plugs

Current through Register Vol. 47, No. 12, March 26, 2025

(a) Internally fired boilers having more than 50 square feet of heating surface shall be fitted with a fusible plug if required, in accordance with the ASME Code.

(b) This provision shall not apply to boilers of the vertical tubular type or to dryback scotch type. The use of fusible plugs in these types of boilers is optional.

(c) Fusible plugs shall not be used where boilers are gas or oil fired, except when the fusible plug is located in such a position that its operation cannot extinguish the flame.

Disclaimer: These regulations may not be the most recent version. New York may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.