New York Codes, Rules and Regulations
Title 10 - DEPARTMENT OF HEALTH
Chapter I - State Sanitary Code
Part 6 - Swimming Pools, Bathing Beaches And Recreational Aquatic Spray Grounds
Subpart 6-3 - Recreational Aquatic Spray Grounds
Operation, Supervision and Maintenance
Section 6-3.19 - Water quality
Current through Register Vol. 46, No. 39, September 25, 2024
(a) Sample collection and analysis. Microbiological samples shall be collected from spray pad treatment tanks when determined by the permit-issuing official to be necessary to evaluate water quality, and be examined in laboratories approved by the New York State Department of Health.
(b) Microbiological quality. Total coliform bacteria levels should not exceed 4 per 100 milliliters in more than one sample examined each month. When the membrane filter technique is used, or when the fermentation tube method is used, coliform bacteria shall not be present in more than 10 percent of portions analyzed in any month; also, total bacteria (heterotrophic plate count or standard plate count) shall not exceed 200 per milliliter.
(c) Chemical quality.
(d) Cleanliness. The spray pad and features shall be kept free of sediment and visible soil, and the treatment tank water surface shall be kept free of visible floating matter.
(e) Turbidity. The turbidity in the spray pad treatment tank shall not exceed three nephelometric turbidity units (NTU) at any time during use. If this turbidity level is exceeded, the spray pad shall be closed for use until the spray pad treatment system reduces the turbidity to less than three NTU.