Current through Register Vol. 46, No. 39, September 25, 2024
Maps, plans and specifications submitted to the State for
approval shall be signed and sealed by an engineer licensed to practice in New
York State. Approval will be based on completeness of submission, appropriate
treatment for the contaminants, demonstrated effectiveness of treatment units,
provision for adequate installation, operation and maintenance of treatment
units and protection of the occupants and operators. Submissions shall include,
but are not limited to, the following items:
(a) A map of the proposed water quality
treatment district. The map or maps shall include:
(1) location of district
boundaries;
(2) existing public
water system boundaries adjacent to or within the proposed water quality
treatment district;
(3) sites of
proposed installation of point-of-use treatment systems;
(4) sites of samples collected to determine
water quality. Number and distribution shall be adequate to determine extent
and degree of contamination; and
(5) sites of existing installations of
point-of-use treatment systems.
(b) Plans and specifications of the proposed
point-of-use treatment systems.
(c)
Plans and specifications of typical installations.
(d) An engineering report detailing the
following items:
(1) test results of sampling
conducted to determine water quality at water sources within the proposed
district;
(2) alternate
non-point-of-use treatment solutions considered;
(3) alternate types of point-of-use treatment
considered;
(4) results of pilot
studies;
(5) recommended
alternative showing the type and location of proposed point-of-use treatment
systems;
(6) evaluation of existing
point-of-use treatment systems and necessary improvements;
(7) operation and maintenance of the
point-of-use treatment installations;
(8) operator qualifications and
training;
(9) administration and
financing of the water quality treatment district. If all or part of the water
quality treatment district services are to be subcontracted to another agency,
private company or individual by the county or town, the qualifications and
responsibilities of the subcontractor shall be included;
(10) monitoring (parameters and frequency) of
the point-of-use treatment systems and sources within the water quality
treatment district; and
(11)
disposal of waste water and materials.
