New Mexico Administrative Code
Title 20 - ENVIRONMENTAL PROTECTION
Chapter 9 - SOLID WASTE
Part 20 - RECYCLING, ILLEGAL DUMPING AND SCRAP TIRE MANAGEMENT
Section 20.9.20.53 - COMPLETION REQUIREMENTS FOR CIVIL ENGINEERING APPLICATIONS

Universal Citation: 20 NM Admin Code 20.9.20.53

Current through Register Vol. 35, No. 18, September 24, 2024

Upon completion of a civil engineering application, the owner or operator shall:

A. remove all scrap tires not used for the civil engineering application;

B. submit a completion report to the department within 60 days after completion. The report shall include photographs documenting that the project has been completed and that all scrap tires not used in the project have been removed; and

C. provide the department with a final report of the completed civil engineering application including as built drawings in accordance with Subsection D of 20.9.20.49 NMAC. If the civil engineering application used 100,000 scrap tires or more or is more than two scrap tire bales high, the as built shall be signed and sealed by a professional engineer registered in New Mexico.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.