New Mexico Administrative Code
Title 20 - ENVIRONMENTAL PROTECTION
Chapter 6 - WATER QUALITY
Part 2 - GROUND AND SURFACE WATER PROTECTION
Section 20.6.2.5104 - WAIVER OF REQUIREMENT BY SECRETARY FOR CLASS I WELLS AND CLASS III WELLS
Universal Citation: 20 NM Admin Code 20.6.2.5104
Current through Register Vol. 35, No. 6, March 26, 2024
A. Where a Class I well or a Class III well or well field, does not penetrate, or inject into or above, and which will not affect, ground water having 10,000 mg/l of less TDS, the secretary may:
(1) issue a discharge
permit for a well or well field with less stringent requirements for area of
review, construction, mechanical integrity, operation, monitoring, and
reporting than required by 20.6.2.5000 through 20.6.2.5399 NMAC; or
(2) for Class III wells only, issue a
discharge permit pursuant to the requirements of 20.6.2.3000 through
20.6.2.3114 NMAC.
B. Authorization of a reduction in requirements under Subsection A of this section shall be granted only if injection will not result in an increased risk of movement of fluids into ground water having 10,000 mg/l or less TDS, except for fluid movement approved pursuant to 20.6.2.5103 NMAC.
Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.