New Mexico Administrative Code
Title 20 - ENVIRONMENTAL PROTECTION
Chapter 5 - PETROLEUM STORAGE TANKS
Part 109 - NEW AND UPGRADED ABOVE GROUND STORAGE TANK SYSTEMS: DESIGN, CONSTRUCTION, AND INSTALLATION
Section 20.5.109.907 - ADDITIONAL PERFORMANCE STANDARDS FOR FIELD-ERECTED ASTS

Universal Citation: 20 NM Admin Code 20.5.109.907

Current through Register Vol. 35, No. 6, March 26, 2024

A. If owners and operators install a field-erected tank, owners and operators shall comply with the current edition of an industry standard or code of practice developed by a nationally recognized association or independent testing laboratory approved in advance by the department.

B. Owners and operators shall use one or more of the following to comply with the requirements of this section:

(1) American Petroleum Institute Standard 620, "Design and Construction of Large, Welded, Low Pressure Storage Tanks";

(2) American Petroleum Institute Standard 650, "Welded Tanks for Oil Storage";

(3) American Petroleum Institute Specification 12B, "Bolted Tanks for Storage of Production Liquids";

(4) American Petroleum Institute Specification 12D, "Field Welded Tanks for Storage of Production Liquids"; or

(5) American Society of Mechanical Engineers B96.1, "Welded Aluminum-Alloy Storage Tanks".

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.