New Mexico Administrative Code
Title 20 - ENVIRONMENTAL PROTECTION
Chapter 5 - PETROLEUM STORAGE TANKS
Part 106 - NEW AND UPGRADED UNDERGROUND STORAGE TANK SYSTEMS: DESIGN, CONSTRUCTION, AND INSTALLATION
Section 20.5.106.605 - INSTALLATION OF UST SYSTEMS
Universal Citation: 20 NM Admin Code 20.5.106.605
Current through Register Vol. 35, No. 6, March 26, 2024
A. Owners and operators shall properly install all USTs and piping:
(1) in accordance with the current edition of
an industry standard or code of practice developed by a nationally recognized
association or independent testing laboratory approved in advance by the
department; and
(2) in accordance
with the manufacturer's instructions.
B. Owners and operators shall use one or more of the following to comply with the requirements of this section:
(1)
American Petroleum
Institute
RP 1615,
"Installation of
Underground Hazardous Substances or Petroleum Storage
Systems";
(2)
Petroleum Equipment Institute
Publication
RP100,
"Recommended Practices for Installation of Underground
Liquid Storage Systems";or
(3)
National Fire Protection
Association Standard 30, "Flammable and Combustible Liquids Code" and
Standard 30A, "Code for Motor Fuel Dispensing
Facilities and Repair Garages".
Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.