New Mexico Administrative Code
Title 20 - ENVIRONMENTAL PROTECTION
Chapter 5 - PETROLEUM STORAGE TANKS
Part 104 - OPERATOR TRAINING
Section 20.5.104.400 - CLASSES OF OPERATORS

Universal Citation: 20 NM Admin Code 20.5.104.400

Current through Register Vol. 35, No. 6, March 26, 2024

There shall be three classes of operators identified as class A, class B, and class C.

A. Designation. Owners and operators shall identify and designate, for each storage tank system or group of storage tank systems at a facility, at least one named individual for each class of operator and provide the department the name(s) and certificate number(s) of the designated class A and B operator in writing within 30 days of a change in the designated operator.

(1) Owners and operators may designate different individuals for each class of operator, or one individual for more than one of the operator classes.

(2) Any individual designated for more than one operator class shall be trained and certified for each class of operator.

B. Training. All individuals designated as a class A, B or C operator shall, at a minimum, be trained and certified according to these regulations by the applicable deadlines in this part. Class A and B operators shall receive department approved training that applies to both AST systems and UST systems.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.