New Mexico Administrative Code
Title 20 - ENVIRONMENTAL PROTECTION
Chapter 3 - RADIATION PROTECTION
Part 4 - STANDARDS FOR PROTECTION AGAINST RADIATION
Section 20.3.4.8 - UNITS OF EXPOSURE AND DOSE
Current through Register Vol. 35, No. 6, March 26, 2024
A. As used in these regulations, the unit of exposure is the coulomb per kilogram (C/kg) of air. One roentgen is equal to 2.58E-4 coulomb per kilogram of air.
B. As used in these regulations, the units of dose are:
C. As used in these regulations, the quality factors for converting absorbed dose to dose equivalent are shown in table 8.1.
TABLE 8.1 QUALITY FACTORS AND ABSORBED DOSE EQUIVALENCIES |
||
Type of Radiation |
Quality Factor (Q) |
Absorbed Dose Equal to A Unit Dose Equivalent1 |
X, gamma, or beta radiation and high-speed electrons |
1 |
1 |
Alpha particles, multiple-charged particles, fission fragments and heavy particles of unknown charge |
20 |
0.05 |
Neutrons of unknown energy |
10 |
0.1 |
High-energy protons |
10 |
0.1 |
Table 8.1 note: 1absorbed dose in gray equal to 1 sievert or the absorbed dose in rad equal to 1 rem.
D. If it is more convenient to measure the neutron fluence rate than to determine the neutron dose equivalent rate in sievert per hour or rem per hour, as provided in Subsection C of this section, 0.01 sievert (1 rem) of neutron radiation of unknown energies may, for purposes of these regulations, be assumed to result from a total fluence of 25 million neutrons per square centimeter incident upon the body. If sufficient information exists to estimate the approximate energy distribution of the neutrons, the licensee or registrant may use the fluence rate per unit dose equivalent or the appropriate Q value from table 8.2 to convert a measured tissue dose in gray or rad to dose equivalent in sievert or rem (Note: The values in table 8.2 are presented in the "E" notation. In this notation a value of 5E-1 represents a value of 5x10-1 or 0.5. A value of 4E+2 represents 4x102 or 400.)
TABLE 8.2 MEAN QUALITY FACTORS, Q, AND FLUENCE PER UNIT DOSE EQUIVALENT FOR MONOENERGETIC NEUTRONS |
|||
Neutron Energy (megaelectronvolt) |
Quality Factor1 (Q) |
Fluence per Unit Dose Equivalent2 (neutrons centimeter-2 rem-1) |
Fluence per Unit Dose Equivalent (neutrons centimeter-2 sievert-1) |
(thermal) 2.5E-8 |
2 |
980E+6 |
980E+8 |
1E-7 |
2 |
980E+6 |
980E+8 |
1E-6 |
2 |
810E+6 |
810E+8 |
1E-5 |
2 |
810E+6 |
810E+8 |
1E-4 |
2 |
840E+6 |
840E+8 |
1E-3 |
2 |
980E+6 |
980E+8 |
1E-2 |
2.5 |
1010E+6 |
1010E+8 |
1E-1 |
7.5 |
170E+6 |
170E+8 |
5E-1 |
11 |
39E+6 |
39E+8 |
1 |
11 |
27E+6 |
27E+8 |
2.5 |
9 |
29E+6 |
29E+8 |
5 |
8 |
23E+6 |
23E+8 |
7 |
7 |
24E+6 |
24E+8 |
10 |
6.5 |
24E+6 |
24E+8 |
14 |
7.5 |
17E+6 |
17E+8 |
20 |
8 |
16E+6 |
16E+8 |
40 |
7 |
14E+6 |
14E+8 |
60 |
5.5 |
16E+6 |
16E+8 |
1E+2 |
4 |
20E+6 |
20E+8 |
2E+2 |
3.5 |
19E+6 |
19E+8 |
3E+2 |
3.5 |
16E+6 |
16E+8 |
4E+2 |
3.5 |
14E+6 |
14E+8 |
Table 8.2 notes:
1 value of quality factor (Q) at the point where the dose equivalent is maximum in a 30-centimeter diameter cylinder tissue-equivalent phantom;
2 monoenergetic neutrons incident normally on a 30-centimeter diameter cylinder tissue-equivalent phantom.