New Mexico Administrative Code
Title 20 - ENVIRONMENTAL PROTECTION
Chapter 2 - AIR QUALITY (STATEWIDE)
Part 74 - PERMITS - PREVENTION OF SIGNIFICANT DETERIORATION (PSD)
Section 20.2.74.303 - AMBIENT IMPACT REQUIREMENTS

Universal Citation: 20 NM Admin Code 20.2.74.303

Current through Register Vol. 35, No. 18, September 24, 2024

A. The requirements of this section shall apply to each pollutant emitted by a new major stationary source or major modification in amounts equal to or greater than those in Table 2 of this Part (20.2.74.502 NMAC). For PM10, the source will only be required to perform ambient impact analysis for PM10 when the source has the potential to emit significant amounts of PM10 (Table 2, 20.2.74.502 NMAC).

B. The allowable emission increases from the proposed source or modification, including secondary emissions, in conjunction with all other applicable emissions increases or reductions, including secondary emissions, shall not cause or contribute to air pollution in violation of:

(1) any national ambient air quality standard in any location; or

(2) any applicable maximum allowable increase as shown in Table 4 of this Part (20.2.74.504 NMAC) over the baseline concentrations in any area;

(3) the owner or operator of the proposed major stationary source or major modification shall demonstrate that neither Paragraph (1) nor Paragraph (2) of 20.2.74.303 NMAC will occur.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.