New Mexico Administrative Code
Title 20 - ENVIRONMENTAL PROTECTION
Chapter 2 - AIR QUALITY (STATEWIDE)
Part 32 - COAL BURNING EQUIPMENT - NITROGEN DIOXIDE
Section 20.2.32.112 - COMPLIANCE DETERMINATION METHODS

Universal Citation: 20 NM Admin Code 20.2.32.112

Current through Register Vol. 35, No. 6, March 26, 2024

A. Unless otherwise required by 40 CFR Part 60, a facility subject to an emission limitation of 20.2.32.109 NMAC or 20.2.32.110 NMAC shall use any of the applicable reference methods specified by the US EPA at 40 CFR Part 60, Appendix A to determine compliance with the nitrogen dioxide emission limitation.

B. Compliance with the total emission limitation of 20.2.32.111 NMAC shall be based on measurements using a continuous emission monitoring system (CEMS) as required by 20.2.32.114 NMAC. Compliance determinations shall be performed using the following formula:

Click to View Image

where:

TE = total station-wide nitrogen dioxide emissions (lb NO2/day);

Ei = daily average emission rate of each unit (lb NO2/MBTU);

Hi = daily average heat input for each unit (MBTU);

n = the number of units of coal burning equipment operated during the day.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.