New Mexico Administrative Code
Title 20 - ENVIRONMENTAL PROTECTION
Chapter 2 - AIR QUALITY (STATEWIDE)
Part 3 - AMBIENT AIR QUALITY STANDARDS
Section 20.2.3.110 - SULFUR COMPOUNDS

Universal Citation: 20 NM Admin Code 20.2.3.110

Current through Register Vol. 35, No. 18, September 24, 2024

The maximum allowable concentrations of the following sulfur-containing air contaminants in the ambient air are as follows:

A. Sulfur Dioxide:

(1) For the state except on the area within 3.5 miles of the Chino Mines Company smelter furnace stack at Hurley:
(a) 24-hour average: 0.10 ppm;

(b) Annual arithmetic average: 0.02 ppm;

(2) For the area within 3.5 miles of the Chino Mines Company smelter furnace stack at Hurley:
(a) 24-hour average, not be exceeded more than once per year: 0.14 ppm;

(b) 3-hour average, not to be exceeded more than once per year: 0.50 ppm;

(c) Annual arithmetic average: 0.03 ppm.

B. Hydrogen Sulfide:

(1) For the state, except the Pecos-Permian Basin Intrastate Air Quality Control Region (1-hour average, not to be exceeded more than once per year): 0.010 ppm;

(2) For the Pecos-Permian Basin Intrastate Air Quality Control Region (1/2 hour average): 0.100 ppm;

(3) For within corporate limits of municipalities within the Pecos-Permian Basin Intrastate Air Quality Control Region (1/2 hour average): 0.030 ppm;

(4) For within five miles of the corporate limits of municipalities having a population of greater than twenty thousand and within the Pecos-Permian Basin Intrastate Air Quality Control Region (1/2 hour average): 0.030 ppm.

C. Total Reduced Sulfur:

(1) For the state, except the Pecos-Permian Basin Intrastate Air Quality Control Region except for hydrogen sulfide (1/2 hour average): 0.003 ppm;

(2) For the Pecos-Permian Basin Intrastate Air Quality Control Region, except for hydrogen sulfide (1/2 hour average): 0.010 ppm;

(3) For within corporate limits of municipalities within the Pecos-Permian Basin Intrastate Air Quality Control Region, except for hydrogen sulfide (1/2 hour average): 0.003 ppm;

(4) For within five miles of the corporate limits of municipalities having a population of greater than twenty thousand and within the Pecos-Permian Basin Intrastate Air Quality Control Region, except for hydrogen sulfide (1/2 hour average): 0.003 ppm.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.