New Mexico Administrative Code
Title 20 - ENVIRONMENTAL PROTECTION
Chapter 2 - AIR QUALITY (STATEWIDE)
Part 15 - PUMICE, MICA AND PERLITE PROCESSING EQUIPMENT
Section 20.2.15.108 - EMISSION LIMITATIONS
Current through Register Vol. 35, No. 18, September 24, 2024
A. The owner or operator of pumice, mica or perlite process equipment shall not permit, cause, suffer or allow particulate matter emissions to the atmosphere from a stack or stacks in excess of the maximum amounts specified in the following table:
|
Process Rate Pounds per Hour |
Maximum Stack Emission Rate Pounds per Hour |
|
10,000 |
10 |
|
20,000 |
15 |
|
30,000 |
22 |
|
40,000 |
28 |
|
50,000 |
31 |
|
100,000 |
33 |
|
200,000 |
37 |
|
300,000 |
40 |
|
400,000 |
43 |
|
500,000 |
47 |
|
600,000 & above |
50 |
B. When the process rate is between any two consecutive process rates in the table, the maximum stack emission rate is determined by interpolation. Where an operation has more than one stack, the maximum stack emission rate applies to the total of the emissions from all stacks.
