New Mexico Administrative Code
Title 20 - ENVIRONMENTAL PROTECTION
Chapter 2 - AIR QUALITY (STATEWIDE)
Part 11 - ASPHALT PROCESS EQUIPMENT
Section 20.2.11.108 - ALLOWABLE EMISSION RATES

Universal Citation: 20 NM Admin Code 20.2.11.108

Current through Register Vol. 35, No. 6, March 26, 2024

A. The owner or operator of asphalt process equipment shall not permit, cause, suffer or allow particulate matter emissions to the atmosphere in excess of the maximum amounts specified in the following table:

Aggregate Process Rate

Pounds per Hour

Maximum Stack Emission Rate

Pounds per Hour

10,000

10

20,000

15

30,000

22

40,000

28

50,000

31

100,000

33

200,000

37

300,000

40

400,000

43

500,000

47

600,000 and above

50

B. When the process rate is between any two consecutive process rates in the table, the maximum stack emission rate is determined by interpolation. Where a plant or operation has more than one stack, the maximum stack emission rate applies to the total of the emissions from all stacks.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.