New Mexico Administrative Code
Title 20 - ENVIRONMENTAL PROTECTION
Chapter 11 - ALBUQUERQUE - BERNALILLO COUNTY AIR QUALITY CONTROL BOARD
Part 69 - PATHOLOGICAL WASTE DESTRUCTORS
Section 20.11.69.28 - COMPLIANCE SCHEDULE FOR EXISTING PATHOLOGICAL WASTE DESTRUCTORS

Universal Citation: 20 NM Admin Code 20.11.69.28

Current through Register Vol. 35, No. 18, September 24, 2024

A. PWDs in existence before the effective date of 20.11.69 NMAC must achieve full compliance with this regulation within ten (10) days of the effective date of 20.11.69 NMAC. Each owner or operator of an existing PWD who intends to permanently cease operating the unit shall remove the unit from the facility within thirty days of the effective date of 20.11.69 NMAC. The department shall be notified of the intent to cease operating within the ten (10) day period specified above. Each owner or operator of an existing PWD shall either demonstrate compliance with the requirements of 20.11.69 NMAC or seek an assurance of discontinuance from the department within the ten (10) day period specified above.

B. Assurances of discontinuance shall contain the following:

(1) owner or operator's name and address;

(2) date of submittal;

(3) description of facility;

(4) description of the property upon which the facility is located;

(5) the following increments of progress:
(a) a date or dates by which contracts for each major phase of construction or installation of emission control systems, or process modification, or orders for their component parts, will be awarded;

(b) a date or dates of initiation of each major phase of on-site construction or installation of emission control equipment or process modification;

(c) a date or dates by which each major phase of on-site construction or installation of emission control equipment or process modification is to be completed; and

(d) a date or dates by which final compliance is to be achieved (no later than Nov 30, 1992 for (less-than) 200pounds/hr units; or April 1, 1993 for single chamber units and (greater-than-or-equal-to) 200pounds/hr units);

(6) a detailed description of the methods or devices to be used to achieve compliance.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.