New Mexico Administrative Code
Title 19 - NATURAL RESOURCES AND WILDLIFE
Chapter 15 - OIL AND GAS
Part 16 - DRILLING AND PRODUCTION
Section 19.15.16.19 - LOG, COMPLETION AND WORKOVER REPORTS

Universal Citation: 19 NM Admin Code 19.15.16.19

Current through Register Vol. 35, No. 18, September 24, 2024

A. Completion report. Within 45 days after the completion of a well drilled for oil or gas, or the recompletion of a well into a different common source of supply, the operator shall file a completion report with the division on form C-105. For the purpose of 19.15.16.19 NMAC, a hole drilled or cored below fresh water or that penetrates oil- or gas-bearing formations or that an owner drills is presumed to be a well drilled for oil or gas. The operator shall signify on form C-105, or alternatively on form C-103, whether the well has been hydraulically fractured.

B. Hydraulic fracture disclosure. For a hydraulically fractured well, the operator shall also complete and file with the FracFocus chemical disclosure registry a completed hydraulic fracturing disclosure within 45 days after completion, recompletion or other hydraulic fracturing treatment of the well. The hydraulic fracturing disclosure shall be completed on a then current edition of the hydraulic fluid product component information form published by FracFocus and shall include complete and correct responses disclosing all information called for by the FracFocus form, provided that:

(1) the division does not require the reporting of information beyond the material safety data sheet data as described in 29 C.F.R. 1910.1200;

(2) the division does not require the reporting or disclosure of proprietary, trade secret or confidential business information; and

(3) the division shall download and archive New Mexico FracFocus submissions on a quarterly basis.

C. If the FracFocus chemical disclosure registry is temporarily inoperable, the operator of a well on which hydraulic fracturing treatment(s) were performed shall file the information required by the then most recent FracFocus form with the division along with Well Completion Report (form C-105) or Sundry Notice (form C-103) reporting the hydraulic fracture treatment and file the information on the FracFocus internet website when the website is again operable. If the FracFocus chemical disclosure registry is discontinued or becomes permanently inoperable, the operator shall continue filing the information with the division until otherwise provided by rule or order.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.