New Mexico Administrative Code
Title 19 - NATURAL RESOURCES AND WILDLIFE
Chapter 15 - OIL AND GAS
Part 108 - BONDING AND REGISTRATION OF SERVICE TECHNICIANS AND SERVICE ESTABLISHMENTS FOR COMMERCIAL WEIGHING OR MEASURING DEVICES
Section 19.15.108.15 - STANDARDS AND TESTING EQUIPMENT

Universal Citation: 19 NM Admin Code 19.15.108.15

Current through Register Vol. 35, No. 24, December 23, 2024

A. A service technician or service establishment must possess or have available sufficient certified test standards to test in accordance with NIST handbook 44 requirements the class of devices for which registration is applied. Prior to registration, and at least annually thereafter, all standards and testing equipment used by the registered service technician or registered service establishment shall be examined by the department or another approved laboratory and a calibration certificate issued for all standards and testing equipment found to be acceptable. A copy of the calibration certificate for all standards and testing equipment used by the registered service technician or registered service establishment shall accompany the registration application.

B. A registered service technician or registered service establishment shall not use in installing, servicing, repairing, or reconditioning a commercial device any standards or testing equipment that has not been certified.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.