New Mexico Administrative Code
Title 19 - NATURAL RESOURCES AND WILDLIFE
Chapter 14 - GEOTHERMAL POWER
Part 53 - GEOTHERMAL RESOURCES WELL LOCATION AND ACREAGE DEDICATION PLAT
Section 19.14.53.8 - GEOTHERMAL RESOURCES WELL LOCATION AND ACREAGE DEDICATION PLAT. (FORM G-102)

Universal Citation: 19 NM Admin Code 19.14.53.8

Current through Register Vol. 35, No. 18, September 24, 2024

A. Form G-102 is a dual purpose form used to show the exact location of the well and the acreage dedicated thereto. The form is also used to show the ownership and status of each lease contained within the dedicated acreage. When there is more than one working interest or royalty owner on a given lease, designation of the majority owner et al. will be sufficient.

B. All information required on form G-102 shall be filled in and certified by the operator of the well except the well location on the plat. This is to be plotted from the outer boundaries of the section and certified by a registered professional engineer and/or land surveyor, registered in the state of New Mexico, or a surveyor approved by the Division. The surveyed location of thermal gradient wells is not required. Instead, an estimated location in a given quarter-quarter section will suffice.

C. Form G-102 shall be submitted in quadruplicate or quintuplicate as provided in Rule G-201 [now 19.14.52 NMAC].

D. Amended form G-102 (in quadruplicate or quintuplicate) shall be filed in the event there is a change in any of the information previously submitted. The well location need not be certified when filing amended form G-102.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.