New Mexico Administrative Code
Title 19 - NATURAL RESOURCES AND WILDLIFE
Chapter 14 - GEOTHERMAL POWER
Part 21 - DRILLING PERMIT
Section 19.14.21.8 - DRILLING PERMIT

Universal Citation: 19 NM Admin Code 19.14.21.8

Current through Register Vol. 35, No. 18, September 24, 2024

A. Prior to the commencement of operations, the owner or operator of any proposed well to be drilled for geothermal exploration, production, observation, or thermal gradient, or for injection or disposal purposes, shall file division form G-101, application for permit to drill, deepen or plug back-geothermal resources well, and obtain approval thereof from the division. form G-101 shall be accompanied by form G-102, geothermal resources well location and acreage dedication plat.

B. No permit shall be approved for the drilling of any well within the corporate limits of any city, town or village of this state unless notice of intention to drill such well has been given to the duly constituted governing body of such city, town or village or its duly authorized agent. Evidence of such notification shall accompany the application for a permit to drill (form G-101).

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.