New Mexico Administrative Code
Title 16 - OCCUPATIONAL AND PROFESSIONAL LICENSING
Chapter 8 - COMMERCIAL AND MEDICAL CANNABIS
Part 2 - LICENSING AND OPERATIONAL REQUIREMENTS FOR CANNABIS ESTABLISHMENTS
Section 16.8.2.33 - CANNABIS MANUFACTURER POLICIES AND PROCEDURES

Universal Citation: 16 NM Admin Code 16.8.2.33

Current through Register Vol. 35, No. 18, September 24, 2024

A. Minimum policy and procedure requirements: A manufacturer shall develop, implement, and maintain on the licensed premises, standard policies and procedures, which shall include the following:

(1) cannabis testing criteria and procedures, which shall be consistent with the testing requirements of the Cannabis Regulation Act, the Lynn and Erin Compassionate Use Act, or division rules, and shall include at a minimum, the following topics:
(a) representative sampling and analytical testing of cannabis or cannabis products for contaminants prior to wholesale or transfer to another cannabis establishment;

(b) recordkeeping and chain of custody protocols for transportation of cannabis or cannabis product samples to a cannabis testing laboratory;

(c) recordkeeping and chain of custody protocols for transportation of cannabis or cannabis products to another cannabis establishment for any purpose;

(d) protocols to ensure that cannabis or cannabis products, including any samples of cannabis or cannabis products, are transported and stored in a manner that prevents degradation, contamination, tampering, or diversion;

(e) protocols for testing sample collection that ensures accurate test results; and

(f) procedures for destruction of a tested batch of cannabis or cannabis products if the testing samples from the tested batch indicate noncompliance with applicable health and safety standards;

(2) employee policies and procedures to address the following minimum requirements:
(a) adherence to state and federal laws;

(b) responding to an emergency, including robbery or a serious accident or incident;

(c) alcohol and drug-free workplace policies and procedures;

(d) safety and security procedures;

(e) occupational health and safety;

(f) crime prevention techniques; and

(g) if applicable, confidentiality laws, including the Health Insurance Portability and Accountability Act of 1996; and

(3) documentation prepared for each employee and statements signed by employees indicating receipt and understanding of policies and procedures.

B. Training program:

(1) Licensee shall implement a training program, approved by the division, to ensure that all personnel present at the premises are provided information and training that, at minimum, covers the following topics within 30 days of the start of employment:
(a) employee health and safety training materials;

(b) health and safety hazards;

(c) hazard communication training for all solvents or chemicals used at the licensed premises and as described in the safety data sheet for each solvent or chemical;

(d) training requirements for the proper use of health and safety measures and controls;

(e) emergency procedures;

(f) security procedures; and

(g) record keeping requirements.

(2) Prior to independently engaging in any cannabis manufacturing process, including but not limited to extraction:
(a) an overview of the process and standard operating procedure(s);

(b) quality control procedures;

(c) hazard analysis and control procedures as appropriate;

(d) proper and safe usage of equipment or machinery;

(e) safe work practices applicable to an employee's job tasks, including appropriate use of any necessary safety or sanitary equipment;

(f) cleaning and maintenance requirements;

(g) emergency operations, including shutdown; and

(h) any additional information reasonably related to an employee's job duties.

(3) A licensee, or employee, involved in the handling, transportation, manufacture, extraction, testing, or packaging of cannabis products must successfully complete a food handler course accredited by the American national standards institute (ANSI) prior to conducting any related activities. Such training shall be maintained while employed under a manufacturing licensee. The licensee shall obtain documentation evidencing the fulfillment of this requirement.

C. Training documentation:

(1) Licensee shall ensure that all personnel receive annual refresher training to cover, at minimum, the topics listed in this section. The licensee shall maintain a record, which contains at minimum:
(a) a list of all personnel at the premises, including at minimum, name and job duties of each;

(b) documentation of training topics and dates of training completion for all personnel;

(c) dates of refresher training completion for all personnel;

(d) the signature of verifying receipt and understanding of each training or refresher training completed.

(2) Licensee may designate supervisory personnel with responsibility to oversee the requirements of this section.

D. Retention of training documentation: Licensees shall maintain documentation of an employee's training for a period of two years for current employees and at least six months after the termination of an employee's employment.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.