New Mexico Administrative Code
Title 16 - OCCUPATIONAL AND PROFESSIONAL LICENSING
Chapter 66 - HOME INSPECTION LICENSING
Part 7 - STANDARDS OF PRACTICE
Section 16.66.7.18 - COOLING AND AIR CONDITIONING

Universal Citation: 16 NM Admin Code 16.66.7.18

Current through Register Vol. 35, No. 18, September 24, 2024

A. The licensee shall open readily openable access panels provided by the manufacturer or installer for routine homeowner maintenance.

B. The licensee shall inspect central and permanently installed cooling equipment and distribution systems, using normal operating controls.

C. In the home inspection report, the licensee shall describe at least the following:

(1) Energy sources; and

(2) Cooling systems.

D. The licensee is not required to:

(1) Operate cooling systems when weather conditions or other circumstances may cause equipment damage;

(2) Operate automatic safety controls;

(3) Inspect electric air cleaning and sanitizing devices;

(4) Inspect cooling units that are not permanently installed or that are installed in windows;

(5) Inspect cooling systems using ground-source, water-source, solar, and renewable energy technologies;

(6) Determine the uniformity, temperature, flow, balance, distribution, size, capacity, BTU, or supply adequacy of the cooling system.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.