New Mexico Administrative Code
Title 16 - OCCUPATIONAL AND PROFESSIONAL LICENSING
Chapter 39 - ENGINEERING AND SURVEYING PRACTITIONERS
Part 1 - GENERAL PROVISIONS-PROFESSIONAL ENGINEERING AND SURVEYING ORGANIZATION AND ADMINISTRATION
Section 16.39.1.8 - THE BOARD

Universal Citation: 16 NM Admin Code 16.39.1.8

Current through Register Vol. 35, No. 18, September 24, 2024

A. The name of this board shall be the state board of licensure for professional engineers and professional surveyors hereinafter referred to as the "board".

B. The official seal of the board shall be an embossed circular seal one and three-quarter inches in diameter consisting of two concentric circles; the outer circle to be one and three-quarter inches in diameter. The inner circle is to be one and one-quarter inches in diameter. The inner circle shall contain the seal of the state of New Mexico and the words, "state of New Mexico." The words, "board of licensure for professional engineers and professional surveyors", shall be contained between the two concentric circles.

C. The fiscal year of the board shall be July 1, through June 30 of the following calendar year.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.