New Mexico Administrative Code
Title 14 - HOUSING AND CONSTRUCTION
Chapter 9 - MECHANICAL CODES
Part 4 - BOILERS
Section 14.9.4.38 - SAFETY APPLIANCES

Universal Citation: 14 NM Admin Code 14.9.4.38

Current through Register Vol. 35, No. 18, September 24, 2024

A. No person shall attempt to remove or do any work on any safety appliance prescribed by these rules while the appliance is subject to pressure.

B. Should any safety appliance be removed for repair during an outage of a boiler, it must be reinstalled and in proper working order before the object is again placed in service.

C. No person shall repair/alter any safety or safety relief valve or pressure-relief valves in any manner.

D. Pursuant to Section 3 [now 14.9.4.3 NMAC] (permits/violations and penalties) of these rules, the alteration of any safety device may be subject to a penalty assessed by the construction industries division, with approval by the construction industries commission.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.