New Mexico Administrative Code
Title 14 - HOUSING AND CONSTRUCTION
Chapter 9 - MECHANICAL CODES
Part 4 - BOILERS
Section 14.9.4.32 - HYDROSTATIC TEST
Universal Citation: 14 NM Admin Code 14.9.4.32
Current through Register Vol. 35, No. 18, September 24, 2024
A. Whenever a boiler is subject to hydrostatic test required by these rules, the required test pressure may be at a pressure no more than the maximum allowable working pressure for the installation so tested, at the discretion of the special inspector.
B. Re-rating of a boiler shall be subject to the requirement of the National Board Inspection Code. The test pressure shall be under proper control so that in no case shall the required test pressure be exceeded by more than six (6) percent.
Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
