New Mexico Administrative Code
Title 14 - HOUSING AND CONSTRUCTION
Chapter 8 - PLUMBING CODES
Part 3 - 2009 NEW MEXICO SWIMMING POOL, SPA AND HOT TUB CODE
Section 14.8.3.16 - CHAPTER 8 FUEL GAS PIPING

Universal Citation: 14 NM Admin Code 14.8.3.16

Current through Register Vol. 35, No. 18, September 24, 2024

See this chapter of the USPSHTC except as provided below.

A. 809.5.2.3 Copper and brass. Delete this section of the USPSHTC and substitute: Copper and brass pipe shall not be used. Threaded aluminum alloy pipe shall not be used with gases corrosive to such material.

B. 809.5.3.2 Copper and brass. Delete this section of the USPSHTC and substitute: Copper and brass pipe shall not be used.

C. 810.12 Electrical bonding and grounding. Delete this section of the USPSHTC and see NMAC 14.10.4.

D. 810.13 Electrical circuits. Delete this section of the USPSHTC and see 14.10.4 NMAC.

E. 810.14 Electrical connections. Delete this section of the USPSHTC and see 14.10.4 NMAC.

F. 812.0 Liquefied petroleum gas facilities and piping. Delete this section of the USPSHTC and substitute the following: Liquefied petroleum gas facilities shall comply with 19.15.40 NMAC, liquefied petroleum gas standards, and 70-5-1 to -23 NMSA 1978, liquefied and compressed gasses.

G. 813.3 Test pressure. See this section of the USPSHTC except add the following: Exception: An existing gas piping system may be tested at a test pressure equal to one and one-half times them operating pressure of the system, but in no case shall it be tested at less than 3 psi.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.