New Mexico Administrative Code
Title 14 - HOUSING AND CONSTRUCTION
Chapter 7 - BUILDING CODES GENERAL
Part 5 - 2009 NEW MEXICO NON-LOAD BEARING BALED STRAW CONSTRUCTION BUILDING STANDARDS
Section 14.7.5.18 - PROFESSIONAL SEAL REQUIREMENT AND CERTIFICATE OF OCCUPANCY

Universal Citation: 14 NM Admin Code 14.7.5.18

Current through Register Vol. 35, No. 18, September 24, 2024

A. Construction documents detailing the structural design of the structure shall be prepared by a licensed New Mexico architect or structural engineer. The architect or engineer stamp must be affixed to each page of the plans detailing construction of the structure with the design processionals signature and date affixed over each stamp.

B. Prior to issuance of a certificate of occupancy by the construction industries division, an inspection report must be provided to the general construction inspector by the licensed New Mexico architect or structural engineer. The report shall attest to the building's structural integrity and conformance with the permitted drawings.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.