New Mexico Administrative Code
Title 14 - HOUSING AND CONSTRUCTION
Chapter 5 - CONSTRUCTION INDUSTRIES GENERAL PROVISIONS
Part 3 - INSPECTIONS
Section 14.5.3.12 - PRODUCT STANDARDS AND APPROVALS

Universal Citation: 14 NM Admin Code 14.5.3.12

Current through Register Vol. 35, No. 18, September 24, 2024

A. Product approval. Construction or installations shall not be approved as code compliant unless the products and materials used meet the standards set forth in the New Mexico construction codes or as approved by the specific TBC pursuant to Subsection D of 14.5.1.11 NMAC.

B. Procedures for determining compliance. The appropriate TBC has the authority to establish the procedures necessary to determine whether products and materials meet the standards set forth in the New Mexico construction codes.

C. Marking systems. Marking/labeling of a listing agency (accredited conformity assessment body) for equipment or materials shall identify products that comply with the standards set forth in the applicable New Mexico construction codes.

D. Approval of listing agencies. A listing agency shall not be approved for certifying, marking/labeling products for use in New Mexico that does not comply with the American national standards institute (ANSI) or other accredited certifying agencies as recommended by the appropriate TBC and approved by the commission.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.